Routers

Grid List

Showing 1–16 of 18 results

Cisco ASR1002-X

Cisco ASR1002-X

Cisco ASR 1002-X router is delivered into 2 rack unit chassis, the route processor for control plane embedded the services processor for data plane traffic as well as the carrier card which is designed to house I/O modules, share port adopters all integrated in the chassis. ASR 1002-X router comes with 6 build-in SFP ports and 3 box slots for I/O connectivity. The integrated embedded service processors offer 4 levels of system performance: 5Gbps which is default, 10, 20, 36Gbps all through software license upgrade without need for any additional hardware. The integrated the route processor comes by default with 4Gb DRAM, upgradeable to 8, 16Gb.

This ASR1002-X is similar with the ASR1002-X=.  The ASR1002-X= is a spare one.

GET A QUOTE

ASR1002-X Specifications

Physical specifications

Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets.

Refer to the applicable hardware installation guide for additional details.

Height: 3.5 in. (88.9 mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

●  38.25 lb (17.36 kg) (with dual AC power supply and SPA blank covers)

●  39.05 lb (17.72 kg) (with dual DC power supply and blank covers)

●  No SPAs included

Note: The Cisco ASR 1002-X has the route processor, ESP, and SIP integrated.

Default memory 4-GB DRAM shared across route processor, ESP, and SIP
Number of SIPs or Ethernet line cards supported Integrated in chassis
Shared port adapters 3 SPA slots
Ethernet port adapters N/A
Cisco ASR 1000 Series ESP Integrated in chassis
Route processor Integrated in the chassis: Cisco ASR 1002-X Series Route Processor with Quad Core Processor
Redundancy Software: Yes
Built-in Gigabit Ethernet ports Yes: 6 Gigabit Ethernet SFP ports
Built-in 10 Gigabit Ethernet port No
Network interface module No
Cisco ASR 1000 Series Cisco ASR 1002-X
ESP support Cisco ASR 1002-X ESP with 5-Gbps (default)

Upgradable through software-activated feature license to 10, 20, or 36 Gbps

ESP bandwidth 5 to 36 Gbps
ESP memory Share the same control memory on route processor
SIPs and Ethernet line cards Integrated in chassis: not upgradable
Embedded hardware-based encryption Yes: Up to 4-Gbps crypto support throughput
Minimum Cisco IOS XE Software release Cisco IOS XE Software Release 3.7.0S
Rack-mounting Yes: 19-inch
Wall-mounting No
External USB flash memory 1-GB USB flash-memory support
Redundant power supply Same as for Cisco ASR 1002
Power input Same as for Cisco ASR 1002
Power consumption ●  Maximum (DC): 590W

●  Maximum (AC): 560W

●  Maximum (out): 470W

Airflow Front-to-back
Operating temperature (nominal) 32 to 104°F
(0 to 40°C)
Operating temperature (short-term) 32 to 122°F
(0 to 50°C)
Operating humidity (nominal) (relative humidity) 10 to 85%
Operating humidity (short-term) 5 to 90%
Storage temperature -40 to 150°F

(-40 to 70°C)

Storage humidity (relative humidity) 5 to 95%
Operating altitude -500 to 10,000 feet
(152 to 3048 meters)
Network Equipment Building Standards (NEBS) GR-1089 and GR-63
EMC standards Same as for Cisco ASR 1001-X
Safety Standard UL60950-1

CSA C22.2 No. 60950-1-03

EN 60950-1

IEC 60950-1

AS/NZS 60950.1

Cisco C1111-8P

Cisco C1111-8P

Cisco 1100 Series Integrated Services Router (ISRs) delivers Cisco IOS® XE Software, providing WAN, comprehensive security, wired and wireless access in a single, high-performance platform. Cisco 1100 Series ISR is ideal for Small and Medium enterprise branch offices. The C1111-8P is the ISR 1100 8 Ports Dual GE WAN Ethernet Router, delivering 1 WAN port and 8GE LAN ports.
GET A QUOTE

EX3400-24T Specification

Description EX3400 24-port 10/100/1000BASE-T with 4 SFP+ and 2 QSFP+ uplink ports (optics not included)
Form factor Fixed platform
Virtual Chassis configuration consisting of up to 10 switches
Junos Fusion Enterprise Satellite device
Dimensions (W x H x D) 17.4 x 1.7 x 13.8 in (43.7 x 4.4 x 35 cm)
1 rack unit
Backplane speed 160 Gbps
Data rate 288 Gbps
Throughput 214 Mpps (wire speed)
40GBASE quad small form-factor pluggable plus transceiver (QSFP+) port densities 2
100GBASE C form-factor pluggable transceiver (CFP) port densities N/A
Resiliency Redundant, field-replaceable power supplies
Redundant trunk groups that provide port redundancy and simplify switch configuration
Operating system Junos OS
Traffic monitoring sFlow
Quality-of-service (QoS) queues/port 8 unicast/4 multicast
MAC addresses 32,000
Jumbo frames 9216 bytes
IPv4 unicast/multicast routes 36,000/4,000
IPv6 unicast/multicast routes 18,000/2,000
Number of VLANs 4,096
ARP entries 16,000

Cisco ISR4221/K9

Cisco ISR4221/K9

Cisco 4221 Integrated Services router is design to deliver advanced services to the small enterprise branch environment. It delivers 35Mbps thoughtput by default. With pay-as-you-grow performance, you can increase forwarding capacity to 75Mbps by buying licenses.
GET A QUOTE

Cisco ISR4221/K9 Specification

Aggregate Throughput

35 Mbps to 75 Mbps

Total onboard WAN or LAN 10/100/1000 ports

2

RJ-45-based ports

2

SFP-based ports

1

Enhanced service-module slots

0

Doublewide service-module slots

0

NIM slots

2

OIR (all I/O modules)

No

Onboard ISC slot

No

Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM

(Combined control/services/data planes)

4 GB

Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)

4 GB

Default memory DDR3 ECC DRAM (data plane)

NA

Maximum memory DDR3 ECC DRAM (data plane)

NA

Default memory DDR3 ECC DRAM (control/services plane)

NA

Maximum memory DDR3 ECC DRAM (control/services plane)

NA

Default flash memory

8 GB

Maximum flash memory

8 GB

External USB 2.0 slots (type A)

1

USB console port -type B mini (up to 115.2 kbps)

0

Serial console port – RJ45 (up to 115.2 kbps)

1 (combo CON/AUX port)

Serial auxiliary port – RJ45

(up to 115.2 kbps)

1 (combo CON/AUX port)

Power-supply options

External: AC Only

Redundant power supply

N/A

AC input voltage

100 to 240 VAC autoranging

AC input frequency

47 to 63 Hz

AC input current range, AC power supply (maximum)

1.5 to 0.6A

AC input surge current

90 A peak and less than 3 Arms per half cycle

Typical power (no modules) (watts)

24

Maximum power with AC power supply (watts)

90

Maximum power with PoE power supply (platform only) (watts)

NA (no PoE support)

Maximum endpoint PoE power available from PoE power supply (watts)

NA (no PoE support)

Cisco ISR4321-SEC/K9

Cisco ISR4321-SEC/K9

Cisco ISR4321-SEC/K9

Cisco ISR4321-SEC/K9

Cisco ISR4321-SEC/K9 is the Cisco ISR4321/k9 router with Security Bundle. Its other specifications are the same as ISR4321/k9.

GET A QUOTE

Cisco ISR4321-SEC/K9 Specification

Type Cisco ISR4321/K9 with Security Bundle
Aggregate Throughput 50 Mbps to 100 Mbps
Total onboard WAN or LAN 10/100/1000 ports 2
RJ-45-based ports 2
SFP-based ports 1
Enhanced service-module slots 0
Doublewide service-module slots 0
NIM slots 2
OIR (all I/O modules) Yes
Onboard ISC slot 1
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM

(Combined control/services/data planes)

4 GB
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) 8 GB
Default memory DDR3 ECC DRAM (data plane) NA
Maximum memory DDR3 ECC DRAM (data plane) NA
Default memory DDR3 ECC DRAM (control/services plane) NA
Maximum memory DDR3 ECC DRAM (control/services plane) NA
Default flash memory 4 GB
Maximum flash memory 8 GB
External USB 2.0 slots (type A) 1
USB console port -type B mini (up to 115.2 kbps) 1
Serial console port – RJ45 (up to 115.2 kbps) 1
Serial auxiliary port – RJ45

(up to 115.2 kbps)

1
Power-supply options External: AC and PoE
Redundant power supply N/A
AC input voltage 100 to 240 VAC autoranging
AC input frequency 47 to 63 Hz
AC input current range, AC power supply (maximum) 1.5 to 0.6A
AC input surge current 90 A peak and less than 3 Arms per half cycle
Typical power (no modules) (watts) 36
Maximum power with AC power supply (watts) 125
Maximum power with PoE power supply (platform only) (watts) 260
Maximum endpoint PoE power available from PoE power supply (watts) 120

Cisco ISR4331-V/K9

Cisco ISR4331-V/K9

Cisco ISR4331-V/K9

Cisco ISR4331-V/K9

Cisco Intergrated Service Router ISR4331-V/K9 Voice bundle is ideally designed for the small to mid-size enterprise branch environment, delivers advanced VOIP services and unprecdent level of WAN intelligence. Cisco ISR4331 combines 2 dual mode Gigabit Ethernet ports and PVDM4 DSP for voice and video services, two network modules, one integrated services card slot and one service module slots which you can add a Gigabit Ethernet switch or maybe a Cisco UCS e-series single blade server module to run virtualized applications.Fully support for the OnePK software development kits means mutual awareness between both network and applications. Application visibility and control are natively available on the router, so you can measure user experience without external probes.

Performance is the key to enabling advanced branch services or scaling across the enterprise. With IOS XE and dedicate control, data, and service CPUs, these platform is unmatched in the industry.ISR 4331 delivering 100Mbps-300Mbps performance on demand,with pay-as-you-grow performance, you can increase forwarding capacity when needed, so the platform performance growth with your business, you only pay for the performance you need. Secure communications are expected in ISR and you will have access to the most advanced encryption platform in the market, IPsec, SSL VPN and flex VPN with support for next-generation encryption standards as well.The Cisco 4331 is the ultimate application delivery platform to mid-size branch offices. This is literally routing redefined.

GET A QUOTE

ISR4331-V/K9 Specification

Description Cisco ISR4331-V/K9 (2GE,2NIM,1SM,4G FLASH,4G DRAM, Voice Bundle)
Aggregate Throughput 100 Mbps to 300 Mbps
Total onboard WAN or LAN 10/100/1000 ports 3
RJ-45-based ports 2
SFP-based ports 2
Enhanced service-module slots 1
Doublewide service-module slots 0
NIM slots 2
OIR (all I/O modules) Yes
Onboard ISC slot 1
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM

(Combined control/services/data planes)

4 GB
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) 16 GB
Default memory DDR3 ECC DRAM (data plane) NA
Maximum memory DDR3 ECC DRAM (data plane) NA
Default memory DDR3 ECC DRAM (control/services plane) NA
Maximum memory DDR3 ECC DRAM (control/services plane) NA
Default flash memory 4 GB
Maximum flash memory 16 GB
External USB 2.0 slots (type A) 1
USB console port -type B mini (up to 115.2 kbps) 1
Serial console port – RJ45 (up to 115.2 kbps) 1
Serial auxiliary port – RJ45

(up to 115.2 kbps)

1
Power-supply options Internal: AC and PoE
Redundant power supply N/A
AC input voltage 100 to 240 VAC autoranging
AC input frequency 47 to 63 Hz
AC input current range, AC power supply (maximum) 3 to 1.3A
AC input surge current 60 A peak and less than 5 Arms per half cycle
Typical power (no modules) (watts) 42
Maximum power with AC power supply (watts) 250
Maximum power with PoE power supply (platform only) (watts) 530
Maximum endpoint PoE power available from PoE power supply (watts) 250

 

Cisco Linksys E2500 Advanced Simultaneous Dual-Band Wireless-N Router

Cisco Linksys E2500 Advanced Simultaneous Dual-Band Wireless-N Router

Cisco Linksys E2500 Advanced Simultaneous Dual-Band Wireless-N Router

Cisco Linksys E2500 Advanced Simultaneous Dual-Band Wireless-N Router

Linksys E2500 Advanced Simultaneous Dual-Band Wireless-N Router. This is easy to install.
GET A QUOTE

Technical Details
Brand Cisco
Series Linksys E2500
Item Height 6.8 Centimeters
Item Width 25.4 Centimeters
Item Weight 748 g
Product Dimensions 32.4 x 25.4 x 6.8 cm
Item model number E2500
Processor Count 1
RAM Size 4 GB
Computer Memory Type SDRAM
Wireless Type 802.11a
Voltage 12 Volts

Cisco Router ISR 900

Cisco Router ISR 900

Cisco Router ISR 900

Cisco Router ISR 900

C921-4P is the Cisco 921 Gigabit Ethernet security router with internal power supply. Cisco 900 Series ISRs deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks. These powerful, fixed-configuration routers provide secure broadband and Metro Ethernet connectivity. Service providers offering managed Ethernet WAN services can deploy them in customer locations as CPE. Centralized and remote management capabilities are available through web-based tools and Cisco IOS® Software for full visibility and control of network configurations at the remote site. The 900 Series ISRs simplify the deployment of Ethernet WAN services, with end-to-end Operations, Administration, and Maintenance (OA&M), Service-Level Agreement (SLA) monitoring and verification, and configuration management. This series ISRs come with a 4-port managed switch, providing LAN ports to connect multiple devices.
GET A QUOTE

C921-4P Specification

WAN interfaces 2 ports Gigabit Ethernet (GE)
LAN interfaces 4-port GE managed switch
Integrated USB 2.0 Yes
Maximum crypto throughput (bit-rate policed) 150 Mbps
Cisco IOS Software
IP and IP services ●  Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)

●  Generic Routing Encapsulation (GRE) and Multipoint GRE (MGRE)

●  Cisco Express Forwarding

●  Standard 802.1d Spanning Tree Protocol

●  Layer 2 Tunneling Protocol (L2TP)

●  L2TP Version 3 (L2TPv3)

●  Network Address Translation (NAT)

●  Dynamic Host Configuration Protocol (DHCP) server, relay, and client

●  Dynamic DNS

●  DNS Proxy

●  DNS Spoofing

●  Access Control Lists (ACLs)

●  IPv4 and IPv6 multicast

●  Open Shortest Path First (OSPF)

●  Border Gateway Protocol (BGP)

●  Performance Routing (PfR)

●  Enhanced Interior Gateway Routing Protocol (EIGRP)

●  Virtual Route Forwarding (VRF) Lite

●  Next Hop Resolution Protocol (NHRP)

●  Bidirectional Forwarding Detection (BFD)

●  Web Cache Communication Protocol (WCCP)

xDSL ●  True Multimode VDSL2 and ADSL2+ over Annex A, B, J, and M, including traditional G.DMT and T1.413

●  World-class interoperability with industry-standard DSL Access Multiplexer (DSLAM) chipsets

●  Highest field reliability with Impulse Noise Protection (INP) over Repetitive Electrical Impulse Noise (REIN) and single isolated impulse noise (SHINE), extended INP delay, G.INP, physical layer retransmission, Seamless Rate Adaptation (SRA), and Bitswap

●  VDSL2 Persistent Storage Device (PSD) profiles up to 17a/b with support for spectral shaping

●  VDSL2 vectoring to offer blazing fiber speeds over copper

●  Remote management with TR069 and CWMP

●  Investment protection with Gigabit Ethernet

Switch features ●  Auto Media Device In/Media Device Cross Over (MDI-MDX)

●  25 802.1Q VLANs

●  MAC filtering

●  Switched Port Analyzer (SPAN)

●  Storm control

●  Smart ports

●  Secure MAC address

●  Internet Group Management Protocol Version 3 (IGMPv3) snooping

●  802.1X

Security features Secure connectivity:

●  Secure Sockets Layer (SSL) VPN for secure remote access

●  Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256

●  Public-Key-Infrastructure (PKI) support

●  50 IPsec tunnels

●  Cisco Easy VPN client and server

●  NAT transparency

●  Dynamic Multipoint VPN (DMVPN)

●  Tunnel-less Group Encrypted Transport VPN (GET VPN)

●  VRF-aware IPsec

●  IPsec over IPv6

●  Adaptive control technology

●  Session Initiation Protocol (SIP) application-layer gateway

●  Cisco IOS Firewall:

◦   Zone-based policy firewall

◦   VRF-aware stateful inspection routing firewall

◦   Stateful inspection transparent firewall

●  Advanced application inspection and control

●  HTTPS, FTP, and Telnet Authentication Proxy

●  Dynamic and static port security

●  Firewall stateful failover

●  VRF-aware firewall

●  Cisco IOS Software black and white lists

●  Integrated threat control:

◦   Intrusion Prevention System (IPS)

●  Control plane policing

●  Flexible packet matching

●  Network foundation protection

Quality of Service (QoS) ●  Low-Latency Queuing (LLQ)

●  Weighted Fair Queuing (WFQ)

●  Class-Based WFQ (CBWFQ)

●  Class-Based Traffic Shaping (CBTS)

●  Class-Based Traffic Policing (CBTP)

●  Policy-Based Routing (PBR)

●  Class-Based QoS MIB

●  Class of Service (CoS)-to-Differentiated Services Code Point (DSCP) mapping

●  Class-Based Weighted Random Early Detection (CBWRED)

●  Network-Based Application Recognition (NBAR)

●  Link Fragmentation and Interleaving (LFI)

●  Resource Reservation Protocol (RSVP)

●  Real-Time Transport Protocol (RTP) header compression (cRTP)

●  Differentiated Services (DiffServ)

●  QoS preclassify and prefragmentation

●  Hierarchical QoS (HQoS)

Management ●  Cisco Configuration Professional

●  Cisco Configuration Express

●  Cisco Configuration Engine support

●  Cisco AutoInstall

●  Cisco IP Service-Level Agreement (IP SLA)

●  Cisco IOS Embedded Event Manager (EEM)

●  CiscoWorks

●  Cisco Security Manager

●  Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, Command-Line Interface (CLI), and HTTP management

●  RADIUS and TACACS+

●  Cisco Next Generation Plug-and-Play (NG PnP) Protocol

High availability ●  Virtual Router Redundancy Protocol (VRRP) (RFC 2338)

●  HSRP

●  MHSRP

Metro Ethernet ●  Ethernet OA&M

●  Ethernet Local Management Interface (E-LMI)

●  IP SLA for Ethernet

IPv6 ●  IPv6 addressing architecture

●  IPv6 name resolution

●  IPv6 statistics

●  IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-Protocol Translation)

●  Internet Control Message Protocol Version 6 (ICMPv6)

●  IPv6 DHCP

●  OSPFv3

●  BGP4+

●  IPv6 Path Maximum Transmission Unit (PMTU)

●  IPv6 neighbor discovery

●  IPv6 stateless address autoconfiguration (SLAAC)

●  IPv6 multicast routing

Application visibility and control ●  NBAR2

●  Flexible NetFlow (FNF)

●  Performance Agent

Number of recommended users ●  50
Default and maximum DRAM ●  Default 1 GB
Default and maximum flash memory ●  2 GB on all Cisco 900 Series ISR models; not upgradable
WAN ●  Refer to Table 2 for details
LAN switch ●  Refer to Table 2 for details
Separate console ports ●  RJ-45
USB 2.0 ●  One USB 2.0 Type A port
Physical dimensions  H x W x D = 1.70 x 9.0 x 9.5 in. (4.32 x 22.86 x 24.13 cm) (includes rubber feet)
Power supply Power specifications:

●  AC input voltage: Universal 100 to 240 VAC

●  Frequency: 50 to 60 Hz

●  Internal power supply (C921-4P and C931-4P only)

Approvals and compliance Safety:

●  IEC 60950-1

●  UL 60950-1

●  CAN/CSA C22.2 No. 60950-1

●  EN 60950-1

●  AS/NZS 60950.1

●  Class I Equipment (C921-4P and C931-4P only)

●  Class III Equipment (C927-4P, C927-4PM, and C926-4P only)

Emissions:

●  47 CFR Part 15: 2006

◦   CISPR22: Edition 6.0: 2008

◦   CNS13438: 2006

◦   EN 300 386 V1.6.1

◦   EN 55032

◦   EN61000-3-2: 2006 [+ amd 1 & 2]

◦   EN61000-3-3: 2008

◦   ICES-003 Issue 5: 2012

◦   KN 22: 2009

●  TCVN 7189: 2009

●  VCCI: V-3/2012.04

Immunity:

●  CISPR24: 2010 [+ amd 1 & 2]

◦   EN300386: V1.6.1

◦   EN55024: 2010

◦   EN61000-6-1: 2007

◦   KN24: 2011

◦   TCVN 7317:2003

Environmental operating range ●  Nonoperating temperature: -40° to 158°F (-40° to 70°C)

●  Nonoperating humidity: 5% to 95% relative humidity (noncondensing)

●  Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m)

●  Operating temperature: 0° to 50°C (de-rate 1°C per 1000-ft increase in altitude)

●  Operating humidity: 5% to 95% relative humidity (noncondensing)

●  Operating altitude: 0 to 10,000 ft (0 to 3000 m)

Cisco RV042 Dual WAN VPN Router

Cisco RV042 Dual WAN VPN Router

Cisco RV042 Dual WAN VPN Router

Cisco RV042 Dual WAN VPN Router

A secure network connection tying your company to the world is the backbone of your business. You need a combination of performance and security to help keep your employees connected to the assets they need to keep your business productive.
GET A QUOTE

Technical Details
Brand Cisco
Model RV042-EU
Model Year 2008
Item Weight 576 g
Product Dimensions 20 x 13 x 3.9 cm
Item model number RV042-EU
Additional Features Dual Fast Ethernet WAN ports for load balancing and/or business continuity, Built-in 4-port Fast Ethernet switch, Strong security | NAT throughput: 100 Mbps; VPN throughput (IPSec): 59 Mbps, High capacity VPN capabilities, LAN: 4 x 10Base-T/100Base-TX – RJ-45; WAN: 1 x 10Base-T/100Base-TX – RJ-45; WAN / DMZ: 1 x 10Base-T/100Base-TX – RJ-45
Batteries Included No
Batteries Required No
Data Transfer Rate 0.1 gigabits_per_second
Connector Type wan
Has Auto Focus No
Programmable Buttons No

Cisco RV042 VPN Router

Cisco RV042 VPN Router

Cisco RV042 VPN Router

Cisco RV042 VPN Router

The Cisco RV042 Dual WAN VPN Router is a proven solution that delivers highly secure, high-performance connectivity at the heart of your small business network. Two connections to a service provider help support business continuity, while high-capacity VPN capabilities enable other offices and employees working remotely to connect to your network.
GET A QUOTE

Technical Details
Brand Cisco
Model RV042
Model Name RV Routers
Item Weight 599 g
Product Dimensions 13 x 20 x 3.9 cm
Item model number RV042
Additional Features Dual Fast Ethernet WAN ports for load balancing and/or business continuity, Built-in 4-port Fast Ethernet switch, High capacity VPN capabilities, Optional cloud-based web security service, Support for Small Business QuickVPN software
Included Components Cisco RV042 VPN Router
Colour Screen No
Batteries Included No
Batteries Required No
Connector Type Wired
Has Auto Focus No
Includes Rechargable Battery No
Programmable Buttons No

Cisco RV260 VPN Router

Cisco RV260 VPN Router

Cisco RV260 VPN Router

Cisco RV260 VPN Router

The Cisco wired RV260 offers a high-performance user experience at an attractive cost point. These models have a dual-core processor that provides performance usually found only in more expensive solutions.
GET A QUOTE

Technical Details
Brand Cisco
Item Weight 2.28 Kg
Package Dimensions 38 x 36.6 x 13 cm
Item model number RV260
Included Components Cisco RV260 VPN Router

Juniper EX2200 48P-4G

Juniper EX2200 48P-4G

Juniper EX2200 48P-4G

Juniper EX2200 48P-4G

The EX2200 line of Ethernet switches, ideal for access-layer deployments in branch offices and campus networks, delivers a level of functionality and performance normally associated with higher-cost solutions.
GET A QUOTE

Technical Details
Brand Juniper Networks
Model EX2200-48P-4G-TAA
Model Year 2010
Item Weight 3.6 Kg
Product Dimensions 44.1 x 25.4 x 4.3 cm
Item model number EX2200-48P-4G-TAA
Wattage 405 Watts
Batteries Included No
Batteries Required No
Data Transfer Rate 104 gigabits_per_second
Number of Ports 1
Connector Type Wired
Has Auto Focus No
Programmable Buttons No

Juniper SRX210HE2-POE Services Gateway

Juniper SRX210HE2-POE Services Gateway

Juniper SRX210HE2-POE Services Gateway

Juniper SRX210HE2-POE Services Gateway

Juniper networks SRX Series services gateways for the branch are security gateways that provide essential capabilities that connect, secure, and manage workforce locations sized from handfuls to hundreds of users. By consolidating fast, highly available switching, routing, security, and applications capabilities in a single device, enterprises can economically deliver new services, safe connectivity, and a satisfying end user experience.
GET A QUOTE

Technical Details
Brand Juniper Networks
Item Height 40.6 Centimeters
Item Width 15.2 Centimeters
Item Weight 2 Kg
Product Dimensions 35.6 x 15.2 x 40.6 cm
Item model number SRX210HE2-POE

Juniper-MX10003-BASE

Juniper-MX10003-BASE

Juniper-MX10003-BASE

Juniper-MX10003-BASE

MX10003-BASE is a Juniper MX10003 base 2-slot chassis; includes 1 RE, 4 fan trays, 4 power supplies, and 1 EMI door with air filter assembly. The service-centric MX10003 Universal Routing Platform is a space- and power-optimized routing platform that helps service providers and cloud operators address long-term traffic, subscriber, and services growth. It provides ultra-high density and throughput in only three rack units (3 U).

GET A QUOTE

MX10003-BASE Specification

Description Juniper MX10003 base 2-slot chassis; includes 1 RE, 4 fan trays, 4 power supplies, and 1 EMI door with air filter assembly
System capacity 2.4 Tbps
Switch fabric capacity per slot N/A
DPCs and/or MPCs per chassis 2 (MPCs only)
Chassis per rack 14
Dimensions (W x H x D) 19 x 5.217 x 30 in (48.26 x 13.25 x 76.2 cm)
Mounting Four-post rack
Power options 90V to 264V AC
Operating temperature 32° to 115° F (0° to 46° C) at sea level
Humidity 5 to 90 percent non-condensing
Altitude 13,000 ft
Number of fan trays 4
Rack units 3

Juniper-MX204

Juniper-MX204

MX204 is a Juniper MX204 chassis with 3 fan trays and 2 power supplies incl. Junos. The SDN-ready MX204 Universal Routing Platform is a cloud-grade routing platform that offers you ultra-high density and throughput in a space- and power-optimized package. The MX204 addresses the emerging edge and metro Ethernet networking needs of service providers, mobile, web-scale operators, and MSOs by delivering 400 Gbps of throughput in support of high-density 10GbE, 40GbE, and 100GbE interfaces—all in just one rack unit.
GET A QUOTE

MX204 Specification

Description Juniper MX204 chassis with 3 fan trays and 2 power supplies incl. Junos
Slots 8 10GbE, 4 100GbE
Maximum 1GbE 24
Maximum 10GbE 24
Maximum 40GbE 4
Maximum 100GbE 4
System Capacity 400 Gbps
Switch Fabric Capacity per Slot N/A
DPCs and/or MPCs per Chassis Built-in
Chassis per Rack 42
Dimensions (W x H x D) 17.6 x 1.75 x 18.7 in (44.7 x 4.45 x 47.5 cm)
Maximum Weight 23.15 lbs / 10.5 kg
Mounting Four-post rack
Power Options 100 V to 240 V AC
-40 V to -72 V DC
Operating Temperature 32° to 131° F (0° to 55° C)
Humidity 5 % to 90% RH, operating, noncondensing
Altitude 6000 ft

Juniper-MX204

Juniper-MX204

MX204 is a Juniper MX204 chassis with 3 fan trays and 2 power supplies incl. Junos. The SDN-ready MX204 Universal Routing Platform is a cloud-grade routing platform that offers you ultra-high density and throughput in a space- and power-optimized package. The MX204 addresses the emerging edge and metro Ethernet networking needs of service providers, mobile, web-scale operators, and MSOs by delivering 400 Gbps of throughput in support of high-density 10GbE, 40GbE, and 100GbE interfaces—all in just one rack unit.
GET A QUOTE

MX204 Specification

Description Juniper MX204 chassis with 3 fan trays and 2 power supplies incl. Junos
Slots 8 10GbE, 4 100GbE
Maximum 1GbE 24
Maximum 10GbE 24
Maximum 40GbE 4
Maximum 100GbE 4
System Capacity 400 Gbps
Switch Fabric Capacity per Slot N/A
DPCs and/or MPCs per Chassis Built-in
Chassis per Rack 42
Dimensions (W x H x D) 17.6 x 1.75 x 18.7 in (44.7 x 4.45 x 47.5 cm)
Maximum Weight 23.15 lbs / 10.5 kg
Mounting Four-post rack
Power Options 100 V to 240 V AC
-40 V to -72 V DC
Operating Temperature 32° to 131° F (0° to 55° C)
Humidity 5 % to 90% RH, operating, noncondensing
Altitude 6000 ft

Juniper-MX204-IR

Juniper-MX204-IR

MX204-IR is a Juniper MX204 chassis with 3 fan trays and 2 power supplies, IR mode. The SDN-ready MX204 Universal Routing Platform is a cloud-grade routing platform that offers you ultra-high density and throughput in a space- and power-optimized package. The MX204 addresses the emerging edge and metro Ethernet networking needs of service providers, mobile, web-scale operators, and MSOs by delivering 400 Gbps of throughput in support of high-density 10GbE, 40GbE, and 100GbE interfaces—all in just one rack unit.
GET A QUOTE

MX204-IR Specification

Description MX204 chassis with 3 fan trays and 2 power supplies, IR mode
Slots 8 10GbE, 4 100GbE
Maximum 1GbE 24
Maximum 10GbE 24
Maximum 40GbE 4
Maximum 100GbE 4
System Capacity 400 Gbps
Switch Fabric Capacity per Slot N/A
DPCs and/or MPCs per Chassis Built-in
Chassis per Rack 42
Dimensions (W x H x D) 17.6 x 1.75 x 18.7 in (44.7 x 4.45 x 47.5 cm)
Maximum Weight 23.15 lbs / 10.5 kg
Mounting Four-post rack
Power Options 100 V to 240 V AC
-40 V to -72 V DC
Operating Temperature 32° to 131° F (0° to 55° C)
Humidity 5 % to 90% RH, operating, noncondensing
Altitude 6000 ft