Cisco ASR1002-X

Cisco ASR 1002-X router is delivered into 2 rack unit chassis, the route processor for control plane embedded the services processor for data plane traffic as well as the carrier card which is designed to house I/O modules, share port adopters all integrated in the chassis. ASR 1002-X router comes with 6 build-in SFP ports and 3 box slots for I/O connectivity. The integrated embedded service processors offer 4 levels of system performance: 5Gbps which is default, 10, 20, 36Gbps all through software license upgrade without need for any additional hardware. The integrated the route processor comes by default with 4Gb DRAM, upgradeable to 8, 16Gb.

This ASR1002-X is similar with the ASR1002-X=.  The ASR1002-X= is a spare one.

GET A QUOTE

ASR1002-X Specifications

Physical specifications

Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets.

Refer to the applicable hardware installation guide for additional details.

Height: 3.5 in. (88.9 mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

●  38.25 lb (17.36 kg) (with dual AC power supply and SPA blank covers)

●  39.05 lb (17.72 kg) (with dual DC power supply and blank covers)

●  No SPAs included

Note: The Cisco ASR 1002-X has the route processor, ESP, and SIP integrated.

Default memory 4-GB DRAM shared across route processor, ESP, and SIP
Number of SIPs or Ethernet line cards supported Integrated in chassis
Shared port adapters 3 SPA slots
Ethernet port adapters N/A
Cisco ASR 1000 Series ESP Integrated in chassis
Route processor Integrated in the chassis: Cisco ASR 1002-X Series Route Processor with Quad Core Processor
Redundancy Software: Yes
Built-in Gigabit Ethernet ports Yes: 6 Gigabit Ethernet SFP ports
Built-in 10 Gigabit Ethernet port No
Network interface module No
Cisco ASR 1000 Series Cisco ASR 1002-X
ESP support Cisco ASR 1002-X ESP with 5-Gbps (default)

Upgradable through software-activated feature license to 10, 20, or 36 Gbps

ESP bandwidth 5 to 36 Gbps
ESP memory Share the same control memory on route processor
SIPs and Ethernet line cards Integrated in chassis: not upgradable
Embedded hardware-based encryption Yes: Up to 4-Gbps crypto support throughput
Minimum Cisco IOS XE Software release Cisco IOS XE Software Release 3.7.0S
Rack-mounting Yes: 19-inch
Wall-mounting No
External USB flash memory 1-GB USB flash-memory support
Redundant power supply Same as for Cisco ASR 1002
Power input Same as for Cisco ASR 1002
Power consumption ●  Maximum (DC): 590W

●  Maximum (AC): 560W

●  Maximum (out): 470W

Airflow Front-to-back
Operating temperature (nominal) 32 to 104°F
(0 to 40°C)
Operating temperature (short-term) 32 to 122°F
(0 to 50°C)
Operating humidity (nominal) (relative humidity) 10 to 85%
Operating humidity (short-term) 5 to 90%
Storage temperature -40 to 150°F

(-40 to 70°C)

Storage humidity (relative humidity) 5 to 95%
Operating altitude -500 to 10,000 feet
(152 to 3048 meters)
Network Equipment Building Standards (NEBS) GR-1089 and GR-63
EMC standards Same as for Cisco ASR 1001-X
Safety Standard UL60950-1

CSA C22.2 No. 60950-1-03

EN 60950-1

IEC 60950-1

AS/NZS 60950.1

Categories: ,

Share this product

Reviews

There are no reviews yet.

Be the first to review “Cisco ASR1002-X”

Your email address will not be published. Required fields are marked *